How to Purify Water With Household Bleach

To purify water with bleach, use regular, unscented liquid household chlorine bleach. For clear water, the EPA says to add 8 drops of 6% bleach or 6 drops of 8.25% bleach per gallon, stir, and let it stand 30 minutes. The water should have a slight chlorine smell when it's ready. If the water is cloudy, let it settle and filter it through a clean cloth first.
Bleach is the backup method in our Water section for times when you can't boil, like a long outage without fuel or a home with no working stove.
The EPA's bleach guidance
Find the strength on your bleach label, then use this chart for each gallon of clear water.
| Bleach strength on the label | Drops per gallon of clear water | Wait time |
|---|---|---|
| 6% | 8 drops | 30 minutes |
| 8.25% | 6 drops | 30 minutes |
Treat each gallon at that rate. For example, a 2-gallon container of clear water with 6% bleach gets 16 drops.
If your bleach strength isn't listed here or isn't shown on the bottle, don't guess. Use another method, like boiling, or find bleach with a clear label.
Step by step
- Check the bottle. It must be regular, unscented liquid household chlorine bleach. Find the strength on the label.
- Start with clear water. If it's cloudy, see the section below first.
- Use a clean dropper. A medicine dropper works well. Keep it only for this job.
- Add the drops. Use the chart above for each gallon.
- Stir or shake. Mix it well. If using a container with a lid, cap it and shake gently.
- Wait 30 minutes. Set a timer.
- Smell the water. It should have a slight chlorine smell. That tells you the treatment worked.
- Store it. Keep treated water in clean, covered containers labeled "treated" with the date.
Choosing the right bleach
Not every bottle on the laundry shelf will work. Here's what to look for and what to avoid.
Use:
- Regular, unscented liquid household chlorine bleach
- A bottle with the strength clearly shown on the label
Don't use:
- Scented bleach
- Color-safe bleach
- Splash-less bleach
- Gel or tablet cleaners that aren't made for water treatment
- Pool or spa chemicals
Bleach loses strength as it ages, so check the date on the bottle and replace older bottles. Buy a small bottle just for your emergency supplies so it's not used up on laundry day.
Treating cloudy water
Bleach works best on clear water. Dirt and debris get in the way. If your water is cloudy:
- Let it settle. Leave it in a container until the sediment sinks to the bottom.
- Pour off the clearer water into a clean container, leaving the sediment behind.
- Filter it through a clean cloth, paper towel or coffee filter.
- Then treat it with bleach using the steps above.
If the water stays very cloudy, or smells like fuel or chemicals, don't drink it. Bleach doesn't remove chemicals.
Bleach safety at home
Bleach is useful, but it needs care:
- Store it out of reach of children and pets, in its original bottle
- Never mix bleach with ammonia, vinegar or other cleaners
- Keep the dropper and bottle separate from food and cups
- If someone swallows bleach, call Poison Control at 1-800-222-1222, or 911 if they're having trouble breathing or are unresponsive
A worked example: three days without boiling
A couple in a ground-floor apartment loses power during a winter storm. Their stove is electric, and they don't have a camp stove. Their stored water lasts the first two days, then runs low.
Their building has a working tap, but the city has issued a boil water notice. Here's what they do:
- They take out their small bottle of unscented bleach. The label shows 6%.
- They fill two clean gallon jugs from the tap. The water is clear.
- They add 8 drops to each jug, cap them and shake.
- They set a timer for 30 minutes, then check for a slight chlorine smell.
- They label the jugs "treated" with the date and use them for drinking and brushing teeth.
When the notice ends, they follow the city's instructions for flushing their taps.
Where bleach fits with other methods
Bleach is one of several tools, and each covers a different gap.
Portable filters can clear water and remove some germs, but many don't handle viruses or chemicals, so check the label. Some households filter water first and then add bleach for an extra layer. Our guide to water filters compares filter types and explains what to look for.
When tap water stops altogether, you may need backup sources inside your home, like the water heater tank or ice in the freezer. Our guide to emergency water sources at home explains which ones are safe to use and which need treating first.
If you have a stove and fuel, boiling is often simpler. Our guide to boiling water covers the CDC's timing, including the longer boil needed at high elevations.
Safe water and clean hands
Treated water helps with more than drinking. Use it for brushing teeth, washing hands before eating and cleaning small cuts. Our guide to sanitation and hygiene explains handwashing with limited water and keeping a household healthy during an outage.
Skip the miracle drops
You'll see water treatment products marketed with alarming claims or promises to make any water safe forever. Plain bleach from the grocery store, used at the EPA's dose, is the method emergency agencies point to. Before buying expensive alternatives, read our guide to survival product red flags.
Your bleach kit checklist
- A small bottle of regular, unscented liquid household chlorine bleach
- A clean medicine dropper, labeled for water only
- Clean cloths or coffee filters for cloudy water
- Clean containers with lids
- Masking tape and a marker for "treated" labels
- A printed copy of the drops-per-gallon chart
Keep these together with your water supply, and check the bleach date when you rotate your water.
Want a guided preparedness plan?
Some people like the structure of a paid guide. This button opens a third-party survival or preparedness program from one of our advertising partners. Its claims are its own, not ours, so weigh them against our red flags checklist.
See the partner program →We may be paid when you click. The program shown can change. Read its terms before you buy anything. How this works
Frequently asked questions
How many drops of bleach do I add to a gallon of water?
For clear water, the EPA says to add 8 drops of 6% bleach or 6 drops of 8.25% bleach per gallon. Stir it and let it stand for 30 minutes before drinking.
What kind of bleach is safe for purifying water?
Use regular, unscented liquid household chlorine bleach. Don't use scented, color-safe or splash-less bleach, and check the label for the strength so you use the right number of drops.
What if the water still doesn't smell like chlorine after 30 minutes?
After treatment, the water should have a slight chlorine smell. If it doesn't, don't rely on that water for drinking; boil it instead or use stored water or another safe source.



