Ready Roots

How to Make a Faraday Cage at Home

By the Ready Roots Editorial Team · Updated November 16, 2026

Woman lining a galvanized steel can with cardboard beside a bagged radio

To make a simple Faraday cage, put small spare electronics in a closed, conductive metal container, such as a galvanized steel can with a tight-fitting lid, after lining the inside with cardboard so nothing touches the metal. A closed metal enclosure can block many electromagnetic fields, but gaps reduce shielding and homemade versions are hard to verify. Think of it as an inexpensive extra step, not a guarantee.

Among the guides in our Power Outages section, this is one of the more specialized. Most people who build one are thinking about rare events like a severe solar storm or an EMP. It is worth saying plainly: storing a few spare devices this way is fine, and the much bigger payoff comes from the everyday outage plan around it.

What a Faraday cage does

A Faraday cage is an enclosure made of conductive material, like metal sheet or fine metal mesh. When electromagnetic energy hits it, the conductive surface carries the energy around the outside instead of letting much of it through. Your microwave oven door, with its metal mesh, works on a similar idea to keep energy inside.

Shielding is a matter of degree, not all or nothing. How well an enclosure works depends on:

  • Material: continuous, conductive metal shields better than thin or coated material.
  • Closure: every gap, seam and loose lid lets some energy in. Gaps reduce shielding.
  • Size of openings: smaller openings let less energy through.
  • Frequency: an enclosure may block some kinds of energy better than others.

What it does not do

  • It does not make a device last forever or protect it from heat, water or rough handling.
  • It cannot protect anything plugged into the wall or connected to an outside wire.
  • It does not protect your home's wiring, appliances or the power grid.
  • A homemade one cannot be proven to work against a specific event at home.

Be cautious of products sold with claims of guaranteed or "military-grade" protection. Our guide to product red flags explains how to spot overconfident claims.

A simple metal-container method

Here is a low-cost approach many households use. It takes about an afternoon.

What you need

  • A galvanized steel trash can with a tight lid, a metal cookie tin or a metal toolbox with a snug lid
  • Cardboard, foam sheets or thick fabric to line the inside
  • Metal foil tape (aluminum tape) to seal the lid seam
  • Plastic zip-top bags or anti-static bags for each device
  • A marker and paper for an inventory sheet kept outside the container

Steps

  1. Pick a container with a lid that closes tightly. Metal touching metal all the way around is the goal.
  2. Clean the lid edge. Remove paint chips, rust or debris where the lid meets the body, so the metal parts make good contact.
  3. Line the inside. Cut cardboard or foam to cover the bottom, sides and underside of the lid so no device touches metal.
  4. Prepare each device. Remove batteries from devices that will be stored for a long time, since batteries can leak. Store the batteries in their own bag in the container. Put each item in a plastic bag.
  5. Pack items loosely. Do not overfill, so the lid seals fully.
  6. Close the lid and seal the seam with metal foil tape all the way around.
  7. Label the outside with a written inventory and date, and keep a copy in your emergency binder.
  8. Store it somewhere cool and dry, off a damp basement floor.

A layered option

Some people put small items in a metal tin inside a larger metal can, each lined with cardboard. Layers may add some shielding, but they still are not proof of protection.

About testing

People often test by putting a phone inside and calling it. If the phone does not ring, some cell signals were reduced. That is a useful check that the lid is closed, but it only says something about phone signals at that moment. It does not show how the container would perform against a powerful pulse at other frequencies, and a phone with weak reception may fail the call for reasons that have nothing to do with the container. Treat the test as a rough check, not proof.

What to put inside

Choose small, inexpensive spares that would help in any long outage:

ItemWhy it helps
Small battery or hand-crank radioGets official news and alerts
Small flashlight or headlampBasic light
A charged power bank and charging cableKeeps a phone going
An old phone with offline maps and saved documentsBackup reference without signal
Small solar chargerRecharges small batteries
Spare batteries (stored separately)Powers everything else
Copies of key documents on a small storage device, plus paper copiesRecords if originals are lost

Paper copies of documents work without any electronics at all. Keep them in your binder too. If you are building a grab-and-go bag, our bug out bag guide explains how to choose small, lightweight gear that fits an evacuation bag.

Maintenance

  • Open the container once or twice a year to check for moisture or battery leaks.
  • Charge power banks and test devices, then repack them.
  • Update the inventory sheet each time.

Where this fits in your plan

A metal container is an extra step. The core of preparing for any outage is still water, food, light, a radio, medicines and a plan with your household. Our guide to preparing for a power outage covers those basics and is the place to start if you have not already.

If you are building one because of EMP concerns, our EMP preparedness page explains what the congressional EMP Commission studied and why real-world effects are uncertain. And because a stored radio and power bank are mainly about staying in touch, our page on phones and communication in outages covers charging and backup ways to reach family.

A sample setup for a small household

A couple renting a one-bedroom apartment might keep a metal cookie tin on a closet shelf holding a hand-crank radio, a small headlamp, a charged power bank, a cable, and a bag of spare batteries, all lined with cardboard and sealed with foil tape. It costs little, takes up little space, and each item is something they would want in any outage.

Your to-do list for today

  • Find a metal container with a tight lid you already own
  • Line it with cardboard
  • Choose three spare items to store
  • Write an inventory and put a copy in your emergency binder
  • Add a calendar reminder to check it in six months
Partner offer · paid placement

Want a guided preparedness plan?

Some people like the structure of a paid guide. This button opens a third-party survival or preparedness program from one of our advertising partners. Its claims are its own, not ours, so weigh them against our red flags checklist.

See the partner program →

We may be paid when you click. The program shown can change. Read its terms before you buy anything. How this works

Frequently asked questions

Does a metal trash can work as a Faraday cage?

A closed, conductive metal container can block many electromagnetic fields, and a galvanized steel can with a tight lid is a common homemade choice. Gaps around the lid reduce shielding, and homemade versions are hard to verify, so treat it as a reasonable low-cost step rather than proven protection.

Why do I need to line a Faraday cage with cardboard?

Items inside should not touch the metal walls, so people line the container with cardboard, foam or another non-conductive material. The lining keeps electronics separated from the metal and cushions them.

Is putting my phone in the microwave or freezer a good test?

A phone losing signal in a container is a rough, partial check at best, because it only shows that some cell signals are reduced. It does not tell you how the container would perform against other kinds of electromagnetic energy, so do not read it as proof.

See a partner coursePartner offer
Partner offer · paid placement

Want to see a preparedness guide?

If you'd like more structure than articles can give, you can look at a third-party preparedness guide from one of our partners. Its claims are its own. No pressure: our free guides aren't going anywhere.

See the partner program →

We may be paid when you click. How this works